Pages

Wednesday, January 30, 2013

Big Day, Big Bed!!!

It was a big day in our house yesterday as the mattress we ordered last week to convert our son's crib to a full size bed was delivered.  He's a little over two now, has the ability to climb in and out of the crib, and about once a week he will wake up in the middle of the night and end up in our bed.  We both like the idea of being able to move to his bed if he wakes up, instead of him coming to our bed and before he hurts himself climbing we figured it was time to make the switch. 

We had bought the full size conversion kit for his crib about a year ago, opting to save some money by skipping the toddler bed conversion kit and go straight for the real thing.  I had hoped on DIYing some bed rails to go with the new mattress, but the store bought ones were only going for $20 and we liked that they were covered with a mesh so I gave up on this DIY dream. 

Goodbye Crib!!!
Anyways, I got home from work and was greeted to a level of excitement that can only be matched by a two year old.  He instantly wanted to show me his new bed, but at that time I don't know how well he actually linked the two mattresses leaning up against the wall to the crib we were about to disassemble.  After a quick change of clothes I dove right into the conversion and began taking apart the crib.  With my little helper by my side uttering the words "daddy help" over and over we had the crib taken apart in about 15 minutes. 



With the crib pieces gone it was time to add the bed rails to the headboard and footboard.  Once again, with my little man helping me all along the way we had them put together in about 10 minutes and were almost ready for the mattress.  All that was left was to screw the slats into the bed frame.  Of course I can't get out my drill without him using his toy drill in a similar fashion, so both of us with our drills in hand began putting the finishing touches on the bed assembly.  We made quick work of this part with me screwing down each slat, and him "working behind me" making sure I had it good and tight with his drill. 

At this point I'm still not sure what he was thinking.  I know we have been talking about a big boy bed for a few weeks now, but how much he understood that I'll never know.  What I do know is the crib he was so used to sleeping in was now gone and a part of me thinks he must have been wondering a ittle bit what exactly was happening.  We begin with the box spring and his excitement only grow, climbing up on the bed and trying to lay down the whole time we are trying to get the bed skirt somewhat even.  Next came the mattress, he was eagerly helping us remove the plastic and the second it was on the bed he had already climbed up and said night-night.  It was a good sign, but we still had dinner, some play time, and bath before actual "night-night" when we would learn how this transition would go. 

We made it through the next few hours of our typical routine pretty normally, only with him constantly talking about his bed and wanting to go get in it.  After bath, a quick snack, and tooth-brushing we had reached the moment of truth.  What would happen when we tried tucking him into a bed he could easily get out of, would he show up in the living room a few minutes later with a smile on his face?  We did everything as normal and while he was excited to get in his bed, he let out a few whimpers when I left the room.  We were worried of what was to come but much to our surprise outside of those few whimpers he went right to sleep and slept through the night without any problems.  Hopefully, it goes this easily every night but I know he was super tired last night as he didn't nap due to the delivery so we will see if he keeps it up.  Either way we were super proud but left wondering when our little boy grew up so much.

The finished product with all his "friends" and blankets.
   

Tuesday, January 29, 2013

DIY Toy Cubbies

I've had this lumber for a few months now, I picked it up on sale at Busy Beaver and have had plans on creating some toy cubbies for our living room.  I drew out a rough sketch of what I wanted to do with it and it has sat in the garage ever since.

The other night I finally got it out and tried to start marking it up for my cuts.  I brought it all in to the dining room table, because; well that was the easiest place to mark it up and not leave my 2 year old helper behind. 

Hopefully, when put together this actually matches the idea in my head.  With no real place other than some Ikea Skubb baskets to house all our smaller miscellaneous toys, such as; wooden blocks, Lil' Wheelies, and Mr. Potato Head pieces we are in desperate need of a more permanent, functional storage solution.  

Anyways, if it works out I'll post some pics of the finished product and hopefully some plans if anyone else would be interested in something similar.

Friday, January 18, 2013

Drywall Everywhere

With everything ripped out, new walls built, and cable and network wires ran to every room it was finally time to start sealing it all up.  We had 100 sheets of drywall and approximately 2 weeks before we were set to have carpet installed. 

My parents were once again up to help, with my mom stuffing insulation in the walls (there was previously none) and my Dad and I hanging drywall we were off.  It started out slow, but once we got in a groove we were moving around pretty quickly.  I must say after a few rooms I became a master at cutting out outlets and switch holes in the drywall and things were moving pretty smoothly.  It still wasn't going as fast as I had hoped, but we were in a rythm and seemed to be getting the job done. 

The next weekend my brother-in-law made the trip up as well and with a little more manpower we not only knocked out the rest of the drywall, but also got the doors and French door in the living room installed.  Previously our living room had an oddly placed door in the corner leading out to the patio with a huge, albeit, ugly window looking out.  We covered up the old door and took out the window in able to put in some French doors leading to the patio.  Here are some before and after shots...


Before and after shots of the French Door we added. 
 I spent most of the rest of the following week finishing the drywall.  This was the first time I had ever finished drywall and while I din't find it to be a difficult task, it was certainly a tdious one.  I remember my forearm and hand throbbing from holding the knife for such long periods of time, but in the end I was pleased with my work and asides from a few isolated spots I may have missed we ended up with some pretty even walls.  As you will see from the pictures we chose to hang the drywall vertically instead of the more traditional horizontal method mainly because the ceiling was already crumbling where there was existing crown moulding and we were going to have to put new crown up to cover it either way.  Here are some shots of drywall hanging and finishing.


First pieces are up in the Master.











Cut-out four our in-wall entertainment rack.







This was by far the biggest part of our project and it was a relief when it was over, mainly because it was time to get carpet and move in but also because I had been working myself to death for the previous month. 

Friday, January 11, 2013

Taking Out Walls

My next project was to get rid of the pointless wall between the living room and dining room.  It seemed like a very unnecessary wall that closed off the dining room a lot more than it needed to be.  Here is the wall already stripped down to the studs...


You can see that the only real purpose this wall served was housing a few HVAC vents and an outlet, other than that it just seemed weird.  It didn't really seperate the rooms as the opening between the wall and the outside wall to the left was still a large opening, but the offset just killed all flow.  We pictured it completely open with knee walls creating a center opening and a few columns to clearly divide the two rooms but also keep it one space. 

To start out I climbed up into the attic and checked out the rafters to see if it was load bearing or not.  I didn't think it was (as a structural engineer you would think I could say that with a little more conviction), but just to be sure I put up a temporary wall and got to work removing what was left of the wall. 
















With everything gone but my "temporary wall" which consisted of 6 2x4's and no nails, probly not the safest but at some point I need to trust my engineering degree and believe myself when I say it isn't load bearing, I was ready to build the new wall.

I used a few 2x6's across the top with some 2x4 spacers to make a beam 5.5" wide to match the 2x6 columns I was putting in.  With the new beam across the top and new columns it was starting to come together. 
















Finally I finished it off with the knee walls...
















Overall we were very happy with how this turned out, we got two distinct spaces but added a much more open feel to the area.  Plus, we now have the knee wall as a place for decorations and picture frames and of course columns to wrap in garland for Christmas. 

Thursday, January 10, 2013

Construction Begins

With a garage full of lumber and drywall I was eager to start putting everything back together.  To start I planned on replacing the hideous built in closets in the kids rooms with an actual closet.  Nothing fancy just rip everything out and put up a new wall to close in the alcove that was left behind with bi-fold doors. 

Here is a look at what the closets in both bedrooms used to look like...


The one pictured here had a door on the right with shallow shelves as that side of the closet has half of the backside of the chimney coming out into it.  Here is what I came up with to deal with the chimney.


With everything out you can now see the chimney to the right and my solution was to create a built in entertainment center.  It's hard to tell in this picture, but the upper portion is wired for cable, network, and an outlet.  The lower portion is left open with about 16" of depth between the wall and the chimney for built in shelving.  I left one large opening 72" wide across the front of the closet for the bi-fold doors.

The closet in the other room had a vent in the ceter of it so for that one I went with 2 36" openings for the bi-fold doors like this (sorry for the smudge I have a few pics in a row with that I must not have noticed at the time):


I'm still a few posts away from getting to the drywall, but here what it looked like with drywall.


I couldn't find a pic of the other closet with drywall, but I don't think anyone will struggle to picture what it looks like.  Overall I was happy with the finished product, especially since I have to admit these were the first walls I had ever built. 

DIY Curtain Rods

While we still have plenty to catch up with where we are now, but this is a look at our most recent project.  Our daughter was born in July and since then her room has not progressed any from the unfinished state it was in before she got here.  We have had her crib in our room up until now, but we are all ready to try and make the move.

Asides from the two unpainted walls and the closet that still needs another coat of drywall mud, our next major concern would be the four windows which currently sit with no curtains, blinds, shades, or coverings of any type.  While her room is on the back of the house and very private, we still couldn't fathom putting her in there with nothing covering the windows.

We found a great deal on these blackout curtains from Meijer, but after looking for curtain rods knew there had to be a way to DIY something for much less than the $100 we would spend to hang them all.  We headed to Home Depot and picked up 2 10ft lengths of 1/2" electrical conduit for $2 bucks each, a couple 4 packs of 1/2" conduit straps for $0.80 each, a couple 4 packs of 2" L-brackets for $4.68 a piece, and lastly found an 8-pack of nuts and bolts that would fit thru the L-bracket to attach it to the conduit strap for a dollar or two.  The final cost was around $17, much better than the price of curtain rods if we can get them to work.  You probly want some spray paint too, but we knew we had some at home already that we wanted to use. 

I started out with my trusty hacksaw and cut the 2 10ft lengths of conduit down to 4 4ft lengths, which would give us approximately 6 extra inches on each side of the window.  I actually would have liked to make them even a little longer than that, but our windows are in the corners I ended up not even being able to get the full 6 inches of overhang on the corner sides.  With the pieces cut I attached the conduit strap to the L-bracket with the bolts and then took the entire assembly along with the rod out to the garage for painting.  I even took the screws I was using to attach to the wall and stuck them in the box to spray paint the heads of them so nothing stuck out when it was finally in place.  You could also paint all the pieces individually before assembly, but I figured that you might lose some paint on the bolts when tightening them up so it just seemed easier to paint it already put together.

Here is a look at the pieces all painted...
 























The cunduit will then fit into the strap like so...


Screw your L-brackets to the wall and you are good to go, here is a sneak peak at the finished product.


We are hoping to finish the bedroom (asides from the closet, more on that later) , this weekend and I will post more pictures of the final result.  This at least gives you an idea of how easy it is to DIY some curtain rods for way cheaper than store bought ones.  I have even seen where you could take a block of wood or dowel to hammer into the end and screw a fancy cabinet knob in to make them more decorative.  We haven't got to this but with the rods practically touching in the two corners we could only do this on the 4 outside ends which would just look odd. 

Wednesday, January 9, 2013

Delivery Day

With the majority of the demo done, the next big day came when we got our big delivery from Home Depot.  One hundred sheets of drywall, somewhere around 25 rolls of inulation (can't remember exactly), one french door, and all the lumber I hade figured we would need.  

I had taken off work for the day because rain was in the forecast and I didn't want anything sitting out in the rain longer than necessary.  The night before I had started to look over our receipt and soon realized that the delivery date the cashier had verbally confirmed and written on our receipt didn't match the actual delivery date printed on the receipt by the computer.  This sent us into a mild-panic, we were already crunched for time and I had already requested off work so not getting the materials the next day could have really thrown things off.  

The next morning, while I set off to continue work on the house until our delivery hopefully arrive, Amanda got on the phone with Home Depot to try and sort things out.  They confirmed our suspicion that we were in fact not set to receive a delivery that day, but after explaining the cashier had told us one day and scheduled us for another day they said the best they could do was try to find a driver available to do it.  About an hour later they called back to give us the good news that they had found a driver and he would call when he was on his way.  This was great news and we had successfully avoided our first real snag that could have thrown all of our plans off. 

Surprisingly, the driver called shortly after and our delivery was going to arrive around lunch time.  As sad as it may sound, my excitement for receiving a load of drywall and lumber was almost uncotrollable.  It was the key piece in trasforming our house from studs and see-through walls to a finished home and I couldn't wait to see the transformation take place. 

 


 




Of course it was raining and we had 100 sheets of drywall to get into the garage.  Luckily the eave on our house is 3 feet and the driver was able to get one stack all the way under that, but it still had to be moved into the garage.  That's where Amanda came in handy, she was hesitant but ended up being more than capable to help me pick it up and move it back into the garage 2 sheets at a time.  Together we were able to knock it out in about 10 minutes. 





As you can see the insulation came on a pallet, and while a roll of insulation isn't very heavy 25 rolls and a pallet is and I had no clue how to move it without unwrapping it and exposing the insulation to the rain.  That's when our French door arrived on a sepearate box truck, a box truck that happened to have a pallet lift that the driver kindly offered to move our insulation into the garage with... Problem solved!!! 






The finished product with everything safe and dry in the garage.


  And finally we get to reward ourselves from 10 minutes of hardwork with a yummy grilled cheese....



Demo Days

Upon closing we immediately began the demolition project of removing all the wood paneling.  This turned out to be the hardest part of the project in my opinion.  We were dealing with an entire house of toungue and groove paneling, meaning there were nails, nails, and even more nails.  Every panel had at least 4 nails throughout it's length and it was quite a process to make sure all were removed. 

The first of many less than an hour after closing... 

















Luckily, we weren't at it alone.  My parents had made the four hour trip to help out and we couldn't have done it without them.  Amanda was pretty much useless as we had a 9 month old who was on the verge of walking and into everything.  She spent most of her time watching the little one and keeping us fed, while Dad and I were ripping panels out as fast as possible and Mom was on nail duty pulling any nails left in the studs or panels after removal.

Here are some more pics of the demolition...

 

 




























When it was all said and done here is a sample of one of the piles of paneling we had when it was over...














We didn' let all that good wood go to waste though, my Dad brought up his utility trailer and got as much of it as we could fit back home for my brother-in-law to use around his farm for various repairs. 

It took the better part of a three-day weekend, but finally the paneling was gone and we could get on to putting everything back together.
 
Pin It button on image hover